Filter
Top Products
7
CORDLESS TELEPHONE
VTECH TELECOMMUNICATIONS LTD.
DC 9V 150mA
CLASS 2 POWER SOURCE ONLY
To AC outlet
Setup
Getting Started
Installation and Charge of Battery Cells in Handset
Follow the steps below:
1. Place the new battery cells in the
Handset with the positive and
negative poles aligned in the battery
compartment.
2. Replace the battery cover by sliding it
upwards
3. If the new battery cells are not already
charged, place the Handset in its
Charger or Base Unit, and allow it to
charge for 10-12 hours. After initial
charge, a maintenance charge of 8
hours should be sufficient.
WARNING: Alkaline batteries must NOT be used in your ev 2625 cordless
telephone. Use only the batteries that came with your phone, or contact
our Customer Support Center (contact information on page 2) to order
additional batteries.
2. Choose the location for your Handset Charger, and plug its power supply into an
electrical outlet.
Charging of the Handset Battery Cells
The Handset of your cordless telephone is powered by rechargeable battery cells. It
charges automatically whenever the Handset is in its charger or Base Unit.
You should charge the battery cells for at least 12 hours when you first
receive your phone. You’ll know the battery cells needs charging when:
• The low battery message and the icon are
displayed.
• The Handset seems completely dead, the
LCD is completely clear and does not
activate when you press the keys.
LOW BATTERY
NOTE: When in LOW BATTERY mode, the keypad sounds, backlighting and speakerphone
features will not work. When your battery has been charged, your features will return
to their normal function.