Filter
Top Products
9
Checking the Ringer
To check the ringer which is currently
programmed, do the following:
• Press PROG/MEM.
• Press the # key.
• Press 0.
• Press the PROG/MEM key to confirm.
Memory Dialing
• The VT2458 can store up to 10
different phone numbers that you can
dial just by pressing PHONE, PROG/
MEM and one of the number keys (0-9)
Programming Speed Dial Numbers
The Handset must be OFF.
• Press PROG/MEM. The IN USE LED
will blink to indicate that you are in the
programming mode.
• Press the number of the memory
location you wish to store the number
in (0-9).
• Using the dial pad, dial the number
you want to store. The number can
be up to 16 digits long. The number
can be entered manually or by using
REDIAL/PAUSE.
• Press MEM to store the phone number
to the key you selected.The phone
exits PROG/MEM mode and emits a
tone.
Speed Number Dialing
• Press PHONE/FLASH to get a dial
tone.
• Press PROG/MEM and the memory
location number key (0-9).
• For example, to dial the number you
assigned to key ‘8’, you would press
PHONE, PROG/MEM, 8.
To Change or Replace a Speed Dial
Number
• To change or replace a stored
number in speed dial memory, simply
enter the new number and store it in
the memory location you wish to
change.
Operating Instructions
Basic Operation