Viking CPA-7B Pager User Manual


  Open as PDF
of 4
 
1 2 3 4 5 6 7 8 9 10
SPEAKERS
600 OHM
AUDIO OUT
COMMON
NIGHT BELL
PAGE TRIGGER
TALK BATTERY
PAGE W/ COMMON AUDIBLE
RING TRIP PAGE W/ NIGHT BELL
+
-
VIKING©
MODEL CPA-7B
GENERAL PURPOSE TELECOM
PAGING SYSTEM
VIKING
ELECTRONICS
HUDSON, WI 54016
PAGING
VOLUME
RING/ALERT TONE
VOLUME
PAGING
INPUT
MUSIC
INPUT
TIME
OUT
MODE SWITCH
TRUNK/PAGING PORT
RING TRIP
MIN MAX MIN MAX
POWER 13.8V AC
C. Paging from an Unused Phone System Trunk Input
1. Set the MODE SWITCH to the TRUNK/PAGING PORT position.
2. Adjust the RING TRIP TIME OUT POT to its maximum (fully clockwise) position.
3. Connect terminal 8 to 5 to provide talk battery on the PAGING INPUT PORT.
4. Connect the unused trunk port to the PAGING INPUT PORT.
Note: If both paging and loud common audible are required, connect the night transfer switch (optional), the phone
system common audible dry contacts and jumper terminal 6 to 7 as shown below.
Background
Music Source
Up to (8) 8 ohm
speakers may
be connected
in parallel.
Night Transfer Switch
(not included)
Unused Phone
System (PABX/KSU)
Trunk Input
D. Paging from a Phone System’s 600 Ohm Paging Port (with page dry contact closure provided)
1. Set the MODE SWITCH to the TRUNK/PAGING PORT position.
2. Adjust the RING TRIP TIME OUT POT to its maximum (fully clockwise) position.
3. Connect the phone system’s paging port to the PAGING INPUT PORT.
4. Connect the phone system’s paging dry contacts to terminals 5 and 7. The contact closure will activate the alert
tone for paging and mute the background music.
Note: If both paging and loud common audible are required, wire the night transfer switch (optional) to the phone
system’s common audible dry contacts and jumper terminals 9 to 6 as shown below.
1 2 3 4 5 6 7 8 9 10
SPEAKERS
600 OHM
AUDIO OUT
COMMON
NIGHT BELL
PAGE TRIGGER
TALK BATTERY
PAGE W/ COMMON AUDIBLE
RING TRIP PAGE W/ NIGHT BELL
+
-
VIKING©
MODEL CPA-7B
GENERAL PURPOSE TELECOM
PAGING SYSTEM
VIKING
ELECTRONICS
HUDSON, WI 54016
PAGING
VOLUME
RING/ALERT TONE
VOLUME
PAGING
INPUT
MUSIC
INPUT
TIME
OUT
MODE SWITCH
TRUNK/PAGING PORT
RING TRIP
MIN MAX MIN MAX
POWER 13.8V AC
Background
Music Source
Up to (8) 8 ohm
speakers may
be connected
in parallel.
6 ft audio
patch cord (included)
Night Transfer Switch
(not included)
Phone System
(PABX/KSU)
Paging Port
Phone System
Dry Contact
Closures.
Page
(see
Note
above)
Common Audible
(see
Note
above)
Caution: Do NOT connect speakers with a combined parallel impedance of less than 1 ohm. To power more
speakers, see Installation/Applications section F.
Caution: Do NOT connect speakers with a combined parallel impedance of less than 1 ohm. To power more
speakers, see Installation/Applications section F.
6 ft audio
patch cord (included)
RING TRIP
TIME OUT
Adjustment
POT
25AE
30AE
25AE
30AE
N.O.
Note: The “Page” contact closure
(below) will initiate paging from the
phone system’s paging port. The
“Common Audible” contact closure
(below) will activate during incoming
ring on the phone system’s line inputs
(programmable on many systems).
Night bell (electronic warble tone) will
then be broadcast in cadence with the
incoming ring.
RING TRIP
TIME OUT
Adjustment
POT
N.O.
N.O.
25AE
30AE
25AE
30AE
Phone System
Common Audible
Dry Contact
Closure
(see Note above)
Note: The “Common Audible” contact
closure (below) will activate during
incoming ring on the phone system’s
line inputs (programmable on many
systems). Night bell (electronic warble
tone) will then be broadcast in
cadence with the incoming ring.
 previous