Valcom V-2901 Answering Machine User Manual


 
VSP-V-2901
Issue 6
1 947301
V-2901
UNIVERSAL DOOR ANSWERING SYSTEM
INTRODUCTION
The V-2901 is a Universal Door Answering System
for use with any single line telephone, electronic or
1A2 key system, or PABX. These instructions
contain the specifications and information necessary
to install, operate, and maintain the Universal Door
Answering System.
SPECIFICATIONS
Purpose
Provides remote door answering from a telephone or
telephone system.
Applications
Electronic Key Systems
PABXs
1A2 Key Systems
Stand Alone Systems
Refer to Figure 1 for a block diagram of a typical
installation.
Features
Line key access from Electronic or 1A2 key
systems
Loop trunk port access from PABX
Dedicated single line telephone access
Built in handsfree amplifier
RJ11 modular connector for Tip and Ring
connections
Power on LED
Provides contact for electric strike plate
Programmable door unlock codes (use with tone
dial telephones)
Input for manual door unlock (push-button)
Removable screw terminal blocks for all
connections
Built in (30 Hz) ringing generator (with on/off
switch)
Ringback tone for speaker
Works with the Valcom V-1070A or V-1071
door plate speakers
AC line powered
Compatible with VPB-260 Battery Back-up
Capacity
The V-2901 is a single talkpath unit
Each V-2901 will drive up to 2 Valcom 45 Ohm
Talkback Speakers
Dimensions/Weight
8.6" H x 11.0" W x 2.3" D
(21.6cm H x 27.9cm W x 5.8cm D)
3 lbs. (1.36 kg)
Specifications
Input Impedance: 600 Ohms
Input Level: -10 dBm Nominal
Output Impedance: 45 Ohms
Ring Supply: 90VAC, 30 Hz
Interrupted 1 sec. on 4 sec. off