Filter
Top Products
16
Changing Channels, Flash and Page
To change channels or access call waiting while the phone is in use, or to use the
one-way page to locate the Handset, follow these steps:
Note: If you do not have the call waiting service, pressing flash may disconnect the
current call.
If the above flash operation does not work and you have the “Easy Call” service
follow your service provider’s instruction to operate “call waiting”.
Handset Base Unit
Changing
Channels
Flash
(Australia)
Flash
(New
Zealand)
Page Find
The paging feature does
not work when the phone is
in use.
Press chan
Note: Change channels to help
eliminate background noise
If the call waiting tone sounds,
press
flash then 2 to accept the
waiting call. (Aus only)
- OR -
To return to the original caller
press
flash then 1. (Aus only)
If the call waiting tone sounds
during a call, press
flash to
toggle between the incoming
and the original call.
Note: When page is pressed on
the Base Unit, the Handset
beeps.
Note: You must use the
Handset to change channels
Note: The Base Unit does not
have
flash. You must use the
Handset to access call waiting.
Note: The Base Unit does not
have
flash. You must use the
Handset to access call waiting.
Press
page on the Base Unit to
locate the Handset.
The flash + 2 call waiting
procedure toggles between
the incoming and original
call (and visa versa).
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.