Filter
Top Products
!
!
!
Move the handset and/or base to a different location away from
metal objects or appliances and tryagain.
Press /channel while on a call to change the operating channel.
Make sure that you are not too far away from the base.
The status light won't illuminate
when the handset is placed on
the base.
!
!
!
Make sure the AC adaptor is plugged into each base and wall outlet.
Make sure the handset is properly seated in the base.
Make sure the charging contacts on each handset and base are clean.
Australia: www.uniden.com.au New Zealand: www.uniden.co.nz
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Page 17
!
!
!
!
!
Check both ends of the telephone line cord are plugged in firmly.
Make sure the AC adaptor is plugged into the base and wall outlet.
Disconnect the AC adaptor for a few minutes, then reconnect it.
Make sure that you are not too far from the base.
Charge the handset.
!
!
!
The handset was picked up before the second ring.
The call was placed through a switchboard.
Call your local telephone company to verify your Caller ID service is current.
!
!
!
The batterypack may be weak. Chargethe battery for 20-25 hours.
The handset may be too far way from the base unit.
Place the base unit away from appliances or metal objects.
Can't make or receive calls.
The audio sounds weak and/or
scratchy.
The handset doesn't ring or
receive a page.
Caller ID does not display.
If you still have a problem.