Uniden XS1455/1455+1 Telephone User Manual


 
47
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other equipment, the
cordless phone provides AutoSecure™ (which electronically locks your phone when each handset is in the cradle)
and Random Code™ digital security which automatically selects one of over 262,000 digital security codes for each
handset and the base. If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically the next time the battery
pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code,
you can change the code.
1) Pick up the handset from the cradle. Press and hold
[nd handset] on the base.
2) While holding
[nd handset], place the handset in the base, and leave the handset in the base for more than 3
seconds.
3) Pick up the handset from the base. Then place the second handset in the base and wait for more than
3 seconds. No need to hold [nd handset] this time.
4) Press
[talk/ash] on one handset. Once you make sure TALK appears on the display, press [end]. Then, try with
the other handset. If each handset displays TALK, a new security code is set. Otherwise, return to step 1 and try
again.
XS1455+1 OM.indd 47 24/6/08 1:36:39 PM