Filter
Top Products
Using the Speed Dial Memory
Storing Names and Numbers in Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in the handset(s). You can
dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits)
that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you
can save your bank account number to speed dial memory. When you call your bank's telephone teller
service and are prompted to enter your account number, simply press the key and the speed
dial number where you stored your account number. Then press the key (XS1215) or the
l key (XS1215+1).
1) With the phone in standby mode, press the key.
2) Enter to select the speed dial number where you would like to
store this entry. You can also scroll through the list with the
and keys. Press the key (XS1215) or the
key (XS1215+1) twice.
3) appears and a cursor flashes indicating that the phone
is ready for the name to be entered.
If the selected speed dial number is already assigned, the Edit
screen appears. You can select to edit this entry, select
to erase this entry, or select to choose another
speed dial number.
memory
select
select/channe
memory
09
/vol/
/vol/ select
select/channel
-
Store Name
Edit
Delete Go Back
!
!
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the cradle,
the phone will return to
standby mode also.
For New Zealand:
Telecom access
numbers are pre-
programmed into speed
dial locations as follows.
Divert On: SPD1
Divert Off: SPD2
Block CID: SPD3
Messages: SPD4
Directory: SPD6
!
!
!
!
!
[23]