Filter
Top Products
Setting Up Your Phone
Extending the Antenna
Before using your phone, be sure to raise its
antenna to the vertical position.
Then, fully extend the antenna.
Installing the Handset Battery Pack
1. Press in on the battery
cover release.
2. Slide the battery
compartment cover down.
3. Align the plastic
connector of the
Nickel-Cadmium
battery pack with
its socket and plug
it in.
Note: The black lead
will be on the right
when the plug is
properly aligned.
4. Place the battery pack inside
the battery compartment,
and slide the battery
cover back on.
Note: The built-in memory backup feature allows
up to 3 minutes to disconnect the old battery pack
and install a new one without losing any
numbers stored in memory.
Cleaning the Battery Contacts
To maintain a good
charge, it is important
to clean all charging
contacts on the
handset and base
about once a month.
Use a pencil eraser or
other contact cleaner.
Do not use any
liquids or solvents.
Charging the Battery Pack
Initial Battery Charging
The rechargeable Nickel-Cadmium battery pack
must be fully charged before using your phone
for the first time. We recommend that the battery
pack charge for approximately 15-20 hours,
without interruption, before plugging the phone
line into your new phone.
Place the handset
on the base. Either
place the handset
with the earpiece in
the cradle.
—OR—
Place the handset in the
cradle with it standing on
end (desk mount only) .
Note: Make sure to change the
handset retainer before
hanging up the phone (wall
mounted bases).
Battery Memory Effect
Rechargeable batteries can develop a “memory”
(reduced charge capacity) caused by repeated
charge and discharge cycles. The battery life will
seem to be shorter every time you use the unit.
7
H:...folded xc800series.vp
Thu Jul 09 15:07:47 1998
Color profile: Disabled
Composite Default screen