Filter
Top Products
Troubleshooting
If your Cordless Telephone is not performing to your expectations, please try
these simple steps. If you are still unable to resolve the problems, contact
Uniden Customer Service for assistance.
Problem
Charge light does not
come on when Handset
is placed on Base Unit.
Audio sounds
and/or scratchy.
weak
Can't make or receive
calls, or if the Handset
does not ring during an
incomingcall.
Handset can't ring or
receive a page.
.
Suggestion
Make sure the AC Adaptor is plugged into
the Base Unit and wall outlet.
Make sure the Handset is properly seated on
the Base Unit.
Make sure that the charge contacts on the
Handset and Base Unit are clean. (See page
18,for instructions)
Make sure that the Base Unit and Handset
antennas are fully extended.
Move the Handset and/or Base Unit to
different locations and try again.
Press the CHANNEL button to select
another channel.
Make sure that the Base Unit and Handset
antennas are fully extended.
Move the Handset closer to the Base Unit.
Make sure the telephone line cord is
connected firmly to the base and telephone
socket.
Make sure the AC Adaptor is plugged into
the Base Unit and wall outlet.
Try unplugging some of the other phones.
You may have too many extension phones
on your telephone line to allow all of them
to ring.
Disconnect the AC Adaptor for a few
minutes and reconnect it.
Battery Pack may be weak. Charge the
battery on the Base Unit for more than 12
hours.
Extend the Base and Handset antennas fully.
The Handset may be too far away from the
Base Unit. Try moving closer.
Place the Base Unit away fromnoise
sources.
The Digital Securitycode may be erased. Set
the Digital Security code. (See page 8 for
instructions)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
25