Filter
Top Products
Troubleshooting
If your cordless Telephone is not performing to your
expectations, please try these simple steps. If you are still unable to resolve
the problems, contact Uniden Customer Service at (800) 297-1023, 8:00
a.m. to 5:00 p.m. EST, Monday through Friday.
Problem Suggestion
Charge light won’t come on when Handset
is placed in Base Unit.
• Make sure AC Adapter is plugged into the
Base Unit and wall outlet.
• Make sure Handset is properly seated in
Base Unit.
• Make sure that the charging contacts on
the Handset and Base Unit are clean.
Audio sounds weak and/or scratchy.
• Make sure that the Base Unit antenna is
fully extended and vertical.
• Move the Handset and/or Base Unit to
different locations and try again.
• Press the
CHAN
button to select another
channel.
Can’t make or receive calls.
• Check both ends of the Base Unit
telephone line cord.
• Make sure the AC Adapter is plugged into
the Base Unit and wall outlet.
• Disconnect the AC Adapter for a few
minutes, and then reconnect it.
Handset doesn’t ring or receive a page.
• Nickel-Cadmium battery pack may be
weak. Charge the battery on the Base
Unit for 15 – 20 hours.
• Set the
RING ON/BATT SAVE
switch on the
Handset to
RING ON
.
• Extend the Base Unit antenna vertically.
• The Handset may be too far away from
the Base Unit.
• Place the Base Unit away from noise
sources.
• The Digital Security Code may be erased.
Set the Digital Code.
40