Filter
Top Products
Storing Memory Numbers (H/O 200)
Up to 10 numbers can be stored in the H/0 200 Handset for speed dialing when
you are away from the base.
Numbers cannot be stored in the Base unit.
Note: These numbers will not be stored in the Address Book
automatically. You need to enter Address Book numbers separately.
1. Pick up the Handset and press
mem
. You will hear a beep and the
talk/batt low
LED flashes.
2. Enter the number you want to store on the Handset keypad.
Note: You may enter a delay between numbers (for accessing a
switchboard, or long distance service) by pressing the
redial/pause
button on the Handset at the point in the number sequence you wish
to pause. The
redial/pause
button counts as one digit. Pressing
redial/pause
more than once will increase the length of the pause
between numbers.
3. Press
mem
. You will hear another confirmation beep.
4. Enter a number (
0-9
) from the Handset keypad for the memory location.
Note: After pressing
mem
the second time, you have 20 seconds to enter
the number you wish to store. Otherwise, an error tone will sound
and the unit returns to Standby.
Erasing a Stored Number (H/O 200)
1. On the Handset, press
mem
twice.
2. Enter the memory location number (0-9) you want to clear. You will hear a
long beep confirming the number is erased.
Dialing Memory Numbers (H/O 200)
1. Press the
talk
key on the Handset.
2. Press the
mem
key on the Handset.
3. Enter the Memory Location Number (0-9).
Chain Dialing (H/O 200)
1. Press the
talk
key on the Handset.
2. Press the
mem
key on the Handset.
3. Enter the Memory Location Number (0-9)
34