Filter
Top Products
SETTING UP YOUR ANSWERING SYSTEM [36]
www.uniden.com
8) Press the or /volume/select key until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9) Press the set key to select the AM/PM setting.
You hear a confirmation tone followed by the announcement "Time," and the day and time
are then announced for your review. After a few seconds, the system announces “To set
security code, press menu again.”
Setting a Personal Security Code (PIN)
If you want to be able to play your messages from a remote location, you need to enter a
two-digit Personal Identification Number (PIN) code (01-99). To select a PIN, perform the
following steps:
1) With the phone in standby mode, press the menu/clock key twice.
The system announces "Security code," and the current PIN code is announced as it is
displayed on the main base. Then the system announces the instructions for setting the
PIN code.
2) Press the or /volume/select key until the desired number appears.
3) Press the set key to select the PIN code. You hear a confirmation tone, then the
announcement "Security code" followed by the new PIN code. After a few seconds, the
system announces “To set ring time, press menu again.”
The PIN code is set to
"80" at the factory.
note
SETTING UP YOUR
ANSWERING SYSTEM