Uniden UH400SX Two-Way Radio User Manual


 
UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM
16
Mounting the MIC Hanger
MIC Hanger mounted over MIC Cable
The curly cord of the Standard MIC and Remote SPK/MIC can extend up to 1.5m.
For practical mounting of the MIC Hanger using the threaded cord technique it is highly
recommended to use this technique with the optional Extension Cable.
Using the second part of the MIC Hanger as a template mark
and drill a single 13mm hole. The hole needs to be large
enough (13mm min) to allow for the MIC plug of the
microphone to t through.
Feed RJ45 MIC plug through the hole and connect to the
optional Extension Cable. Connect the other end of the
Extension Cable to a MIC Jack on the radio.
Mount the MIC Hanger using the Screw (single part) or
Double Sided Tape (two part) option described on the
previous page, making sure the MIC Hanger is centred over
the hole where the MIC cable is fed through. The single or two
part MIC assembly has a routing cavity to allow tting over the
MIC cable.
uh400sx, uh500sx, uh400sx-RM, uhSec1:16 Sec1:16uh400sx, uh500sx, uh400sx-RM, uhSec1:16 Sec1:16 1/2/08 1:31:26 PM1/2/08 1:31:26 PM