Uniden UH054L Two-Way Radio User Manual


 
The signal coming from your radio is received
by the Repeater station and then retransmitted
at the same time on another channel. This
operation is called "duplexing".
Your UH-054 is designed with the capability to
access and use repeater stations.
Channels 01 through 08 have the option to
operate in Duplex Mode. When any of these
channels are set to operate in duplex mode
during transmission, the UH-054 automatically
sends the signal at a frequency 30 channels
above the original. After transmitting, the radio
reverts back to its original operating frequency.
For example,
(1) CH01 on Duplex Mode will Receive on
CH 01 but Transmit on CH31
(2) CH02 on Duplex Mode will Receive on
CH 02 but Transmit on CH32 etc....
If you transmit on CH01 Duplex mode, you are
actually transmitting on CH31, the repeater
station down-converts your signal and
retransmits on CH01.
TO operate UH-O54 in Duplex Mode
egoCH01 is being used
in your area for
repeater use.
Press DUPLEX
momentarity. The DUP
icon appears.
Press DUPLEX again
to deactivate the
duplex operation.
UH-054 will return to
simplex operation.
MEM n 1=
P U 1 =
...
MEMn 1=
cUPP U 1 =
MEMn 1=
P U 1 =
12