Uniden UH-048XR Two-Way Radio User Manual


 
Press [] or [] to
select the additional
channel you wish to
monitor. Press []to
confirm your selection and to activate dual-watch
mode. Otherwise, the selected channel is automatically
accepted if no key is pressed after 5 Secs.
Note: Pressing [Function] will stop Dual-Watch Mode
operation.
SCANNING
This feature allows you to scan for an active channel
and communicate with the party transmitting.
1. Press
[Function] button until appears in the
large display and the auto channel scan icon
[ ] flashes.
2. Press
[] or [] to
select up or down.
Note: [] means scanning
goes from lower to
higher channel,
[
] means scanning goes from higher
to lower channel.
3. Press []to confirm your selection and to
activate the scan mode. Otherwise the status
selected is automatically accepted if no key is
pressed after 5 Secs.
10