Filter
Top Products
REPLY DELAY
While scanning, the stops at a busy channel and
receives a transmission. When the received signal is over, the
unit will wait for 2 seconds for the return of the signal,
otherwise, the radio resumes scanning.
The flashes during the Setting mode. Press channel/scan
or to select or is shown on the display
when Keylock on is selected to on.
VOX
KEYLOCK ON/OFF
VOX
'oF'
TX
VOX
is the automatic transmitting function by inputting voice
into the optional headset mic without pressing the
button.
Press two times momentarily in Stand By mode to enter
Sensitivity mode.
The current selected setting will flash on the
display.
Press channel/scan or to adjust the sensitivity. 1
is the highest sensitivity and 4 is the lowest sensitivity.
can be turned off by selecting . The icon is shown on
the display when is selected to on.
The icon blinks when the voice level is of a level where it
is possible to transmit at the current selected sensitivity
level.
Press two times momentarily to confirm the selected
setting and exit to standby.
Press three times momentarily in Stand By mode to enter
Keylock mode.
To exit Keylock on mode, press and hold to turn the unit
off and then turn on again.
VOX
VOX
VOX
VOX
VOX
VOX
VOX
'on' 'oF'.
UH039P
CTCSS
channel indicator
Press to confirm the selected setting.
''
''
9
PTT
While in Keylock on mode, the UH039P will still
receive transmissions.