5
The LCD on your radio shows a battery
meter in the lower right corner. The
icon indicates a fully powered unit. As the
batteries become low, will flash.
After 10 seconds, the channel number
disappears.
When the batteries in the unit are low, the unit will go into a Battery Low/Sleep Mode.
The Scan Mode, Transmit, and Transmit Call Tone Mode are disabled. Replace the
batteries immediately to continue using the radio.
Because you will most likely use your radio when you are out and about, the unit comes
equipped with a belt clip to fasten the unit to your belt, pocket, or purse.
To remove the belt clip, turn the screws counterclockwise.
To attach the belt clip:
1. Insert the belt clip screws into the slot
on the belt clip.
2. Align the screws with the holes on the back
of the radio and turn them clockwise,
using a Phillips screwdriver to secure the
belt clip. Do not over-tighten.
Low Battery Alert
Belt Clip
FRS300.qxd 7/25/00 18:00 Page 5