Filter
Top Products
[ 27 ]
MEMORY DIALING
MEMORY DIALING
Erasing a Stored Name and Phone Number
11
Press and hold until “Memory Store“
is displayed.
22
Press and or enter a two-digit number (01 - 20)
to select the memory location you would like to edit.
33
Press .
The following screen appears with the memory location
number that you have selected in the display.
44
Press to move the pointer down to “
Delete
Memory
“ command line.
ª
ª
•
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number. Refer to
“ Storing Phone Numbers
and Names; With the
Base“ on page 23.
Memory Store
01 UNIDEN CORP
02 JOHN DOE
Edit Memory02
Delete Memory02
Go Back
Edit Memory02
Delete Memory02
Go Back
77
Use the number keypad, or to edit the phone number.
The phone number cannot exceed 20 digits. (See page 22.)
If you don´t want to change the phone number, skip this step.
88
Press . The handset beeps and displays the
confirmation screen. The memory storage is complete.
For example, if you store a name and number into
memory location number 01, the display shows
“
Memory01 Stored“. After about 2 seconds,
“
Memory Store“ is displayed.
99
Press to return to standby mode.
delete/int com
Memory01 Stored
Memory Store
01 UNIDEN CORP
02 JOHN DOE
TRU3465 newstyle 8/2/00 11:24 AM Page 27