Filter
Top Products
USING YOUR PHONE [ 11 ]
EEnntteerriinngg aa PPaauussee iinn MMeemmoorryy DDiiaalliinngg
If you would like to use a phone number stored in memory to access voice
mail, for example, you can store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in “Storing a Number in Memory“,
then press the
ppaauussee
button on the handset to place a pause in the phone
number sequence. Each pause counts as one digit and represents a two
second delay of time between the digits.
Follow the remaining steps in the “Storing a Number in Memory“ section to
complete the operation.
SSttoorriinngg MMiixxeedd TToonnee//PPuullssee NNuummbbeerrss
If your phone is set up for pulse dialing, you can store a mixed mode number
(up to 20 digits) to easily access long distance services.
1. Remove the handset from the base and press
mmeemmoorryy
.
The
ttaallkk//bbaatttteerryy llooww
LED flashes.
2. Enter the number to be dialed in pulse mode.
3. Press the
ttoonnee
button on the handset. The
ttoonnee
button counts as one digit
and enters a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press
mmeemmoorryy
and a number (0-9) on the keypad for the memory location
you wish to use. You hear a long beep and the
ttaallkk//bbaatttteerryy llooww
LED goes out.
USING YOUR PHONE
Remember, the phone
number you wish to store
cannot have more than
20 digits, including the
pause. (The
ppaauussee
button
counts as one digit.)
TRU341 8/8/00 18:11 Page 11