Filter
Top Products
MEMORY DIALING[ 30 ]
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number.
Erasing a Stored Name and Phone Number
11
Press and hold in standby mode until
“
Memory Store“ is displayed.
22
Press and or enter a two-digit number (01 - 20)
to select the memory location you would like to erase.
33
Press .
The following screen appears with the memory location
number that you have selected in the display.
44
Press to move the pointer down to “
Delete
Memory
“ command line.
77
Use the number keypad, or to edit the phone number.
The phone number cannot exceed 20 digits. (See page 24.)
If you don´t want to change the phone number, skip this step.
88
Press . The handset beeps and displays the confirmation screen.
The memory storage is complete.
For example, if you store a name and number into
memory location number 01, the display shows
“
Memory01 Stored“. After about 2 seconds,
“
Memory Store“ is displayed.
99
Press to return to standby mode.
EXT1365 (ENG)-8/9 Final 8/13/01 10:56 Page 30