Filter
Top Products
37
4. If you want to set CIDCW, use
the ▲ and ▼ keys to move the cursor
to 2 CIDCW.
Press the
select
key to toggle between On and Off.
▼ Programming Your Area Code
1. Press and hold
caller id
for two
seconds. The following screen appears:
2. Use the ▲ and ▼ keys to
select
line 1
or
line 2
.
The following screen appears:
3. Use the ▲ and ▼ keys to move the
cursor to select 3 Area Code:
Press
select
. Use the number keypad to
enter or change the area code. Press
select
again.
4. After you have made your selections, press
caller id
to return to
Caller ID setup screen. Or, press
exit
to return to standby.
▼ Screening your calls
Caller ID allows you to review caller
information before answering your
phone. At the beginning of the second
ring, the display shows the line number
that is being used, name, and phone number of the caller. If your
Caller ID service is number only, the name does not appear
on the second line.
If a name or number is not available, the display shows a
message such as Incomplete Data, Private Number,
Private Name, etc.
Line 1
Smith John
817-555-1212
1>Auto Talk:Off
2 CIDCW :On
3 Area Code:
Caller ID Setup
1>Line 1
2 Line 2
1>Auto Talk:Off
2 CIDCW :On
3 Area Code:
If your have no New
Caller ID name/numbers.
“00” displays.
Once a Caller ID message
has been viewed, it is no
longer considered a new
message.
If you have no Caller ID
name/numbers, then the
total is shown as 00.
exs9660 Reference Guide.qxd 9/7/99 1:08 PM Page 37