Filter
Top Products
10
Battery use time (per charge)
From fully charged
• Six hours coutinuous use.
• Ten days when the handset is in the standby mode.
When the battery charge becomes low
When the voltage of battery pack in the handset is very low and
needs to be charged, the phone is programmed to eliminate
functions in order to save power. If the battery charge becomes low,
talk/batt LED blinks. If the phone is in use, the handset beeps.
Complete your conversation as quickly as possible and return the
handset to the base unit for charging.
Cleaning the charging contacts
To maintain a good charge,
it is important to clean the
charging contacts on the
handset and base unit about
once a month. Use a pencil
eraser to gently wipe the
handset and base charging
contacts.
Do not use any liquids or solvents.
Even when the battery
pack is not being used, it
will gradually discharge
over a long period. For
optimum performance, be
sure to return the handset
to the base unit after a
telephone call for
charging the battery.
To prevent other parties from making unauthorized calls on your
phone line, a digital code was added to the EXS 2010. Your phone’s
handset and base share this code, which is randomly set each time
you place the handset on the base.
Automatic digital code security
p
a
g
e
/
f
i
n
d
p
o
w
e
r
s
t
a
t
u
s
DIGITAL
S
P
R
E
A
D
S
P
E
C
T
R
A
M
900MHz
EXS 2010 6/28/00 4:12 PM Page 14