Filter
Top Products
5. Raise the antenna on the base.
6. Plug the AC Adapter into a standard 120V AC wall outlet
that is not controlled by a wall switch.
▼Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the
phone directly on a wall. Before mounting your cordless
telephone, consider the following:
Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a hazard
when inserting screws into the wall.
Make sure the wall material is capable of supporting the
weight of the base and handset; otherwise, damage to the unit
could result.
Use #10 screws with anchoring devices suitable for the wall
material where the base will be placed.
1. Insert the screws, with their appropriate
anchor device, 3 5/16 inches apart.
Allow 3/16 of an inch between the wall
and screw heads for mounting the phone.
6. Place the base on the screws
and push down until it’s
firmly seated.
After the unit is mounted,
raise the antenna.
7. Plug the other end of the telephone
line into the telephone wall jack.
8. Plug the AC Adapter into a standard 120V AC wall outlet
that is not controlled by a wall switch.
6
2. Plug the AC Adapter
into the base.
3. Place the AC Adapter cord
inside the left channel
cord holder.
4. Plug one end of the
long telephone cord
into the
TEL LINE
jack
on the base.
5. Place the telephone cord
into the right channel
cord holder.
Use only the AC adapter that came
with the phone.
C:...exp91_92_93.vp
Wed Jun 24 14:31:55 1998
Color profile: Disabled
Composite Default screen