Uniden EXI 4246 Telephone User Manual


 
QUICK REFERENCE GUIDE [1]
www.uniden.com
QUICK REFERENCE GUIDE
EXI4246
Make sure your cordless phone's
packaging includes the following items.
Base Handset AC adapter
Belt Clip Rechargeable
battery
Telephone
cord
Also included: • Owner's manual
Plug the other end into the
telephone wall jack.
Plug one end of the
telephone cord into
the base TEL LINE
jack.
Step 2 Install Handset Battery Pack and Charge
Remove the
cover.
Connect the
battery pack
with the cor-
rect polarity.
Replace the
cover.
Note
Use ONLY the Uniden recharge-
able battery pack supplied with
your new phone!
Step 1 Check the Package Contents
Charge the handset 15-20 hours.
Plug the AC adapter cord to
the DC IN 9V jack (yellow).
Plug the AC adapter to a
120V AC power outlet.
Route the cord.
Route the cord.
Route the cord.
Note
Use ONLY the Uniden AC adapter
supplied with your new phone!
6QVCN
Place the handset in
the base.
Make sure that
charge LED
illuminates.
Fully charge the battery pack by placing the
handset in the base before using phone.
Step 3 Set up the Base
Step 4 Charge the Handset
Step 5 Connect to the Phone Line
Step 6 Make & Receive Calls
To Make a Call
To Receive a Call
To Hang Up a Call
Press
talk/flash .
Listen for dial
tone.
Dial the desired
number.
Pick up the handset
and press talk/flash .
Press end or return
the handset to the
base.
Additional Features
For more information on these and
other features, please refer to your
Owner's Manual. For your
convenience, listed below are
important features that will help
you set up your new cordless phone.
Refer to your Owner's Manual
for detailed operations.
For answers to questions and to
order genuine Uniden parts and
accessories 24 hours a day visit our
website at www.uniden.com. If you
have any problems, you can also call
our Customer Hotline at 1-800-297-
1023, Mon-Fri 7 a.m. to 7 p.m., Sat/
Sun 9 a.m. to 5 p.m. CST. (Phone
support is closed on holidays.)
Handset/Base Set up:
- Adjust the Earpiece
Volume P.19
- Set the Ringer Volume P.17
- Set Tone/Pulse Dialing P.16
Caller ID:
Set Caller ID on Call Waiting
(CIDCW) P.14
Note: You must subscribe to Caller
ID services through your local
telephone provider to use Caller
ID and CIDCW.
UP078.book Page 1 Thursday, December 14, 2006 1:58 PM