Filter
Top Products
GETTING STARTED[ 14 ]
Setting Menu Options
There are five setup options available. They are Caller ID options [AutoTalk, CIDCW
(Caller ID on Call Waiting), Area Code], Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the talk/flash button. If
the phone rings when AutoTalk is on, simply remove the handset from the base and
the phone automatically answers the call. If the phone rings when AutoTalk is off,
you must press talk/flash to answer the call.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold cid/menu. The following screen appears.
2) Use and or a number key (1 and 2) to move the pointer
to the selection that you would like to change.
Press select to toggle between ¨
On¨ and ¨Off¨ for AutoTalk and CIDCW.
3) Press end and return the handset to the base unit. The handset returns to the
standby mode.
To enter your Area Code
If you enter a 3-digit area code number in the
Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option, if your
calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit number.
For calls received from outside your local area code, you will see a full 10-digit number.
If your calling area
requires 10-digit
dialing, do not program
this option.
EXI376_OM 2/8/2 2:04 PM Page 14