Filter
Top Products
Troubleshooting
Troubleshooting [84]
www.uniden.com
The Caller ID does not display.
•The call was placed through a switchboard.
•Call your local telephone company to verify your Caller ID service is current. There may be a problem
with your Caller ID service.
You cannot register the
handset at the base.
•Charge the battery pack in the handset for 10 hours.
•Change the Digital Security Code (see page 15).
The handset doesn't
communicate with other
handsets.
•Change the Digital Security Code (see page 15).
•Make sure that you have registered all handsets.
An extra handset can't join the
conversation.
•Make sure there are not 2 handsets already using the conference feature.
•Make sure that another handset is not in privacy mode.
Room Monitor feature does not
work.
•Make sure to place the handset(s) within the range of the base.
•Make sure that Room Monitor is set to On.
The answering machine does
not work.
• Make sure the base unit is plugged in.
• Make sure that the answering machine is turned on.
•Make sure that the message record time is not set to Announce only
(see page 67).
Messages are incomplete.
•The incoming messages may be too long. Remind callers to leave a brief message.
• The memory maybe full. Delete some or all of the saved message.
No sound on the base unit or
handset speaker during call
monitoring or message
playback.
•Adjust the speaker volume on the base unit or handset.
•Make sure the call screen feature is set to on.
Symptom Suggestion