Filter
Top Products
9
Installing the Base Unit and Charging Cradle
1) Connect each AC adapter to the DC IN 9V jack and to each
standard 120V AC wall outlet.
Note:
• Use only the supplied AD-0001 AC adapter for the
base unit and AD-310 or AD-1010 for the charging
cradle. Do not use any other AC adapter.
• Do not place the power cord where it creates a
trip hazard or where it could become chafed and
create a re or electrical hazard.
2)
Charge the handsets by placing one handset in the base unit
and the other in the charging cradle with the keypad facing
forward.
Route the cord.Route the cord.