Uniden DX 834 Series Cordless Telephone User Manual


 
Troubleshooting
If your DX834 Cordless Telephone is not performing to your expectations, please try these simple steps.
If you are still unable to resolve the problems, contact Uniden Customer Service for assistance.
Problem
Charge light won’t come on when Handset
is placed in Base Unit.
Audio sounds weak and/or scratchy.
Can’t make or receive calls.
Handset doesn’t ring or receive a page.
Suggestion
Make sure the AC Adapter is plugged into the
Base Unit and wall outlet.
Make sure Handset is properly seated in
Base Unit.
Make sure that the charging contacts on the
Handset and Base Unit are clean.
Make sure that the Base Unit antenna is fully
vertical and extended.
Move the Handset and/or Base Unit to different
locations and try again.
Press the chan button to select another channel.
Check both ends of the Base Unit telephone
line cord.
Make sure the AC Adapter is plugged into the Base
Unit and wall outlet.
Disconnect the AC Adapter for a few minutes and
then reconnect it.
Nickel-Cadmium battery pack may be weak.
Charge the battery on the Base Unit for 15-20
hours.
Extend the Base Unit antenna vertically.
The Handset may be too far away from the
Base Unit.
Place the Base Unit away from noise sources.
The Digital Security Code may be erased.
Set the Digital Code.
22
DX834
DX834OM.qxd 4/12/98 11:49 Page 22