Filter
Top Products
2. Plug the AC
Adapter into the
Base Unit.
3. Place the AC
Adapter cord
inside the
molded channel.
4. Plug one end of
the long
telephone cord
into the
TEL LINE
jack on the Base
Unit.
5. Place the cord
inside the
molded channel
on the bottom of
the Base Unit.
6. Place the Base
Unit on the
screws and
push down until
it’s firmly seated.
7. Plug the other
end of the
telephone line
cord into the
wall jack.
8. Plug the AC
Adapter into a
standard 120V
AC wall outlet.
Note: Do not
use an outlet
controlled by a
wall switch.
DX834/DXC834 9