Filter
Top Products
Mounting the Base Unit on a Wall
Standard wall plate mounting
DC IN 9V
TEL LINE
240V AC
This phone can be mounted on any standard wall plate.
1) Make the AC adapter and the telephone line cord through
the hole on the wall mount adapter.
2) Plug the AC adapter into the jack.
3) Plug the telephone line cord into the jack.
4) Slide the wall mount adapter into the notches on the base.
5) Plug the AC adapter into a standard wall outlet.
Hook the cord on the notch of the wall mount adapter.
6) Plug the telephone line cord into the telephone outlet.
Hook the cord on the notch of the wall mount adapter.
7) Align the mounting slots on the base with the mounting
posts on the wall. Then push in and down until the phone
is firmly seated. To remove, push up a tab on the wall
mount adapter as shown.
[12]
GETTING STARTED