Register the Handset
You need to register the DSS5805 before use.
To register the additional handset, place the DSS5805 handset on
the original unit’s base (DSS5855) for at least 5 seconds. The status
LED on the original base will flash indicating that registration is
occurring. After 5 seconds, the DSS5805 handset will be registered.
•In some cases you may need to attempt registration
a few times.
•You cannot register the handset when the original phone
is in use.
– 4 –
Call Transfer Feature
You can transfer an outside call to the original unit. For more
instructions, see the owner’s manual supplied with the original unit.
•If you transfer a call and it is not picked up after 5 minutes,
you hear a beep, and the call will be disconnected.
•Only one handset at a time can talk with an outside caller.
The earcap of this telephone may attract and retain small
metallic objects.
To transfer a call to the Press xfer/del during a call.
original unit When the original unit receives the
transferred call, the DSS5805 handset
returns to the standby mode.
To receive a transferred call Press
talk/flash or spkr to answer
from the original unit the transferred call.
To cancel the transfer Press
talk/flash or spkr.