Filter
Top Products
Answering a Transferred Call
Using Special Features
Muting the Ringer (One Call Only)
When a station receives a call transfer, it sounds a paging tone; handsets also show the ID of the station that is
paging. To accept the call transfer:
1. To answer the page and speak to the transferring station, press or on the handset.
On the base, press or ( on the dual-keypad base).
2. To accept the call and speak to the caller, press on the handset or on the base.
3. When you accept the transferred call, the transferring station will be disconnected.
Only the first station to answer the transfer page will be connected to the call. If the transfer page is not picked
up within one minute, the operation will be canceled.
Do not disturb (DND) allows you to mute the ringer of all stations at once. With the phone in standby, press and
hold on the base. You will hear a confirmation tone and the dnd LED illuminates. To cancel, press
again. You can also mute the ringer tone while the phone is ringing by pressing on the base.
While the phone is ringing, press on the handset or on the base to mute the ringer for this call. The
phone will ring again on the next call. (The handset must be off the cradle to mute the ringer.)
[ / flash] [xfer/intercom]
[speaker] [int'com] [hold/int'com/xfer]
[ / flash] [speaker]
[dnd] [dnd]
[dnd]
Note: If the answering system is off, it will automatically turn on when you activate DND. If
you turn the answering system off while DND is on, DND automatically turns off along
with the answering system.
[] [ ]
Do Not Disturb (All Calls)
[38]