Filter
Top Products
[44]
Answering an Intercom Page
Room/Baby Monitor
When the intercom page tone sounds, the display shows the ID of the
station that is paging.
From the handset, press or . If AutoTalk is
on, the handset automatically answers the page when you remove the
handset from the cradle. If Any Key Answer is on, press any key of the
twelve-key pad.
From the base, press , or .
To hang up an intercom page from the handset, press .
To hang up an intercom page from the base, press .
This feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to
monitor; it will function as a microphone. Another handset can be set to function as a remote speaker, allowing you
to monitor sounds in the room.
1. Press and enter the ROOM MONITOR menu.
TO ROOM MONITOR appears.
2. Select the station you want to monitor by using or .
3. Press . ROOM MONITOR appears, and you hear
sounds in the room where the station is installed.
4. To turn off the Room Monitor, press or return
the handset to the cradle.
[ /flash] [xfer/intercom]
[int'com/xfer] [speaker]
[]
[int'com/xfer]
[menu/clear]
[] []
[]
Notes:
This feature only works when both handsets are within the range of
the base.
If the party is out of range, UNAVAILABLE appears in the display, and
the operation is canceled.
While a pair of handsets is in Room/Baby Monitoring, they cannot be used
to make or receive calls. Other handsets can still make and receive calls.
[select/ ]
!
!
!