Filter
Top Products
22
22
To use the mute feature during a
conversation, press
mute. The other party will
not be able to hear you although you can hear
them. To disable the mute feature, press mute
again.
▼ Intercom from the Base Unit
1. Press
int on the base unit. (If there is no answer press int again to disconnect).
2. Press
int on the handset to answer the intercom.
3. Speak into the mouthpiece.
4. To turn off the intercom, press
int on the base unit.
-OR-
Press int on the handset.
You may use the DS72 handset to monitor activity near the base unit without
anyone present at the base unit.
To turn Room Monitoring on:
1. Press
int on the handset.
2. There is a beep sound from the base unit then automatically two-way
communications are now set up between the base unit and the handset.
3. To turn monitoring off, press
int on the handset.
▼ Transferring a call from the Handset to the Base Unit
When a phone call is answered at the handset, you can transfer the call to the
base unit.
1. During a call, press
int on the handset, the call is placed on hold automatically and
the base unit is paged. (If there is no answer press
int again to return to the call).
2. At the base unit, press
int to answer the page. An intercom link is now established
between the handset and the base unit. Speak into the microphone.
CALL TRANSFER
ROOM MONITOR
INTERCOM
h
flash redial/p
int mem holdmute
12
abc
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
*
0#
3
def
vol
MUTE