Uniden TRU 346 Telephone User Manual


 
ADDITIONAL INFORMATION [ 39 ]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
ADDITIONAL INFORMATION
SSyymmppttoomm SSuuggggeessttiioonn
The
ssttaattuuss
LED won´t light Make sure the AC adapter is plugged into the base unit
when the handset is placed and wall outlet.
in the base unit. Make sure the handset is properly seated in the base unit.
Make sure the charging contacts on the handset and
base unit are clean.
The audio sounds weak Press during a call to help eliminate
and/or scratchy. background noise.
Make sure that the base unit antenna is in a vertical position.
Move the handset and or base unit to a different location
away from metal objects or appliances and try again.
Make sure that you are not too far from the base.
Can´t make or receive calls. Check both ends of the base unit telephone line cord.
Make sure the AC adapter is plugged into the base unit
and wall outlet.
Disconnect the AC adapter for a few minutes,
then reconnect it.
Reset the digital security code (See page 36).
Make sure is pressed.
TRU346 8/9/00 12:38 Page 39