3737
Adjusting the Ringer,
Earpiece and Speaker Volume
Note: The handset earpiece and the handset speaker have separate volume settings.
Base Speaker: You can choose from ten volume levels for the base speaker when the answering system
announces or plays a message. To adjust the base speaker volume, press VOLUME
(to make it louder) or
VOLUME
(to make it softer).
Adjusting the Audio Tone
If you aren’t satisfi ed with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is
recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:
While on a call, press MENU/SELECT.
Move the cursor to select Audio Tone, and then press MENU/SELECT.
Move the cursor to select desired option (High Tone, Natural Tone, or Low Tone), and then press MENU/
SELECT. Selected option appears in the display for two seconds, and then the display returns to normal.
Finding a Lost Handset
To locate a misplaced handset, press FIND on the base when the phone is in standby. The handsets connected to
the paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press
FIND again or any key on the found handset.
Note: Handsets that are not currently connected to this base will not be paged.
1.
2.
3.
DECT 2035+1 OM.indb 37DECT 2035+1 OM.indb 37 15/7/08 12:00:25 PM15/7/08 12:00:25 PM