Filter
Top Products
On the DECT1820 handset you want to register:
On your original base:
On the DECT1820 handset:
1. Press to access the main menu.
2. Press up or down key until is displayed and
press .
Press up or down key to display and press
.Press up or down key to select your base number and press .
Press and hold for approx. 3 seconds until you hear
the registration tone. You are now in ‘registration mode’.
If the base already has the maximum number of handsets (6)
registered to it you will need to de-register one of the existing
handsets before you can register the new handset.
See section below for de-registering handsets.
Enter the base PIN code. Pre-set base PIN code is 0000. You will
hear a confirmation tone when registration is complete.
When in standby mode, the new handset number will be displayed.
The handset will automatically be allocated with the next available
handset number.
If registration is unsuccessful, the display will show
and you will need to follow the registration
procedure again.
"Add.Settings"
"Register"
Not
Registered
find handset
menu/ok
menu/ok
menu/ok
menu/ok
[4]