Filter
Top Products
CHARGING THE HANDSET BATTERIES
Charging of the Handset batteries takes place automatically when the Handset is placed on
the Main Base or Additional Charger.
An LED on the side of the Base Station indicates that the Handset is charging.
When first setting up, the batteries should be charged uninterrupted for 15-20 hours; this
will ensure that they are fully charged.
In use, it is advisable to return the Handset to the Charge Base to be charged at regular
intervals. After fully charging the Handset during setting up, the Handset should never
require longer than about six hours to return to its fully charged condition, e.g. overnight.
When the battery is fully charged:
• 6 Hours talk time
• 120 Hours Standby time
DESCRIPTION OF HANDSET KEYS
3
SETTING UP
Talk Key: Pressing is equivalent to picking up a conventional
telephone.
Memory Key: Used to access Dialling Memories.
Up/Down (Cycle) Key: Some settings offer a series of options,
e.g. Five ring styles are offered. These options can be selected either by
pressing the appropriate number key or by cycling through the options using
the key.
Redial / Pause Key: Recalls and displays the last four telephone numbers
called.
Flash / Call Waiting: Used to access call waiting or to access some features
of a business PABX
Internal Call Key: If you have more than one handset registered on the
Main Base, then internal calls may be made between these handsets.
Program Mode: Used to programme speed dial numbers and
telephone settings.
Power / Delete Key: The Power / Delete Key serves three functions on
the Handset:
Power On/Off
Last Digit Delete
Program Abort
int
Only use the
batteries supplied or
rechargable AA Ni
Cad batteries. DO
NOT USE
STANDARD
BATTERIES.
Dect 1802 Qk 7/19/02 3:45 PM Page 7