Uniden DCX291 Cordless Telephone User Manual


  Open as PDF
of 8
 
English - 3
REGISTERING TO A BASE
#
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's D2998 and D2997 bases.
For the most up-to-date list of which bases this handset is compatible
with, see our website.
Registration Methods
There are three different registration methods, but it's easy to figure out
which one applies to your handset and base. Answer the two questions to
register the handset to one of the compatible bases.
Does the handset fit in the base cradle?
Yes Placethehandsetinthebase.Thedisplayshouldsay
Registering
.
No Does the base have an LCD display?
Yes 1.Onthebase,openthemenuandselect
Register Handset
.
Thedisplayshouldsay
Registering
.
2.Onthehandset,pressandhold
Pound (#)
untilthedisplay
says
Registering
(about2seconds).
No 1.DisconnectthebaseACadapter.
2.Onthebase,pressandhold
Find
whileyoureconnectthe
adapter.
3.Onthehandset,pressandhold
Pound (#)
untilthedisplay
says
Registering
(about2seconds).
#
After about 30 seconds, the handset display should say
Registration
Complete
.
Test the connection
Pick up the handset and press
Talk/end
. Make sure you get a dial tone.
(Press
Talk/end
again to hang up.)
If... Try...
x
youdon'thearadialtone
x
thedisplaysays
Registration Failed
Makingsurethehandsetisfully
charged,thentryingagain.
 previous next