Filter
Top Products
[53] MULTI-HANDSET FEATURES
www.uniden.com
Call Transfer Feature
The call transfer feature allows you to transfer a call between two handsets.
1) During a call, press hold/transfer/int’com.
2) Use /vol/
∧ or /vol/∨ to select the handset you
want to transfer the call to, then press select/ /
audio tone.
The call will automatically be placed on hold, and a
paging tone sounds.
To cancel the transfer, press talk/flash or on the initiating handset.
Answering a Call Transfer Page
When the page tone sounds, the display will show the ID of the handset that is
transferring the call.
1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will
automatically answers when you pick it up. Or if Any Key Answer is enabled,
pressing a number key,
*
/tone/ , or #/ will answer the page.)
2) Press talk/flash or intcom/hold.
Accepting the call transfer
After answering the page, if you want to accept the call and speak to the outside
caller, press talk/flash.
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
•If all handsets are
paged, only the first
party to answer the
page will connect.
•If you do not select a
handset within ten
seconds, the operation
will be canceled.
note
MULTI-HANDSET FEATURES