Uniden D17803BT Cordless Telephone User Manual


 
12 -English
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
again.
# If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.
Multihandset Features
# To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came
with the base and up to 11 DCX170 accessory handsets. Your base also
supports a total of 2 DRX100 range extenders, including any that came
with your phone. If you have any DWX handsets, the D1780 is limited to
a total of 6 accessory handsets
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a Not Registered message. For
registration instructions, see p. 18, or see the accessory handset manual.
If a handset was ever registered to a base, you must reset it before it can
register to a new base; see p. 18, or see the accessory handset manual.
Conference Calling
When an outside call comes in, two handsets can join in a conference
call with the outside caller.
To join a call that’s already in progress, just press
Talk/flash
or
sPEakEr
.
To leave the conference call, hang up normally; the other handset
remains connected to the call.
Call Transfer
To... Press...
transfer a call
inTErcoM/clEar
. The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
Talk/flash
to rejoin the call).
cancel a transfer
Talk/flash
to return to the call.
accept a
transferred call
inTErcoM/clEar
to answer the page and speak to the other
handset. Then, press
Talk/flash
to speak to the caller.
Privacy Mode
To activate privacy mode on a call in progress, press
MEnu/sElEcT
twice.
As long as privacy mode is on, you'll see a in the display, and no other