Filter
Top Products
English - 9
To...
Using the
earpiece
Using the
speakerphone
mute the microphone during
a call
press
MEssagE/MuTE
(press again to turn the
microphone back on).
put a call on hold press
inTErcoM/clEar*
.
return to a call on hold press
Talk/flash
. press
sPEakEr
.
make a speed dial call
press and hold the speed dial number
for 1.5 seconds. After you verify that the
system is displaying the correct phonebook
data for that speed dial number, press
Talk/
flash
or
sPEakEr
on the handset.
* Aer 5 minutes on hold, the call will be disconnected.
Assigning a Speed Dial Number
You can assign a speed dial number to a phonebook entry when you create
that entry for the first time or when you edit it. Press
PhonEbook
and select
Create New
. As you enter the phonebook number, one of the options you
will see is to assign a speed dial number to that phonebook entry. You can
assign up to 10 speed dials, 0 - 9.
Finding a Lost Handset
With the phone in standby, press
find hs
on the base. All handsets beep for
1 minute; to cancel, press
find hs
again or press any handset key.
Changing the Volume
To change the... When... Press...
earpiece or speaker
volume for each handset
you are listening to that
earpiece or speaker (playing
messages, etc.)
uP
to increase
the volume.
down
to
decrease it.
base speaker volume
ringer volume for each
handset or the base*
the phone is in standby
* If you turn the ringer all the way down, that particular ringer turns o.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller’s name) of incoming
calls. Contact your telephone provider for more information.