Uniden Cordless Telephon Cordless Telephone User Manual


 
EXPANDING YOUR PHONE [ 45]
EXPANDING YOUR
PHONE
Operation
Making and receiving calls
If you press talk/flash or spkr on the handset while the other handset is in use,
you will hear a beep and “
Unavailable” will appear. The handset will return to the
standby mode.
If you charge the second handset and pick it up at the same time when you pick the
original handset from the base, the call will be transferred to the second handset.
Security code
You can change the digital security code, only from the original handset.
Memory locations (Redial memory/Dynamic memory locations)
Memory locations in the original handset and the second handset are independent.
Page
If you press any key on a handset while paging, the paging sound from the other
handset will stop as well.
3-way conversation
You can initiate the 3-way conversation by using the second handset.
(You cannot use both the original handset and the second handset to
initiate the 3-way conversation together.)
Caller ID
When you receive a CIDCW during a call, the Caller ID information will not be displayed
or stored in the other handset. Each handset works independently when in this mode.
To display CIDCW on the second handset, you must turn On the CIDCW or CW Deluxe On
the original unit.
Others
You can’t use or purchase the second handset as an alternative of the original handset.
Save this owner’s manual. The TXC580 owner’s manual describes only the instructions
specific to the second handset. For detailed operation, refer to this owner’s manual
(for TRU5865).
Only one handset can
establish a call.
TRU5865_OM_B6 7/17/02 4:10 PM Page 45