Filter
Top Products
7
When the battery needs to be recharged, you will hear warning beeps every 30 seconds and see
the red LED (depending on your headset status).
NOTE: Use ONLY the AC adapter supplied with the headset. Using any other adapter could
damage your headset, create a re hazard, or cause a risk of electric shock!
Pair the Headset to Your Bluetooth Phone
Pairing is like “introducing” two Bluetooth devices and giving them permission to connect
to each other. If you want to use the headset with more than one phone, you need to pair
it with each phone separately. Once you pair a phone to the headset, the two devices can
connect automatically whenever they can detect each other.
NOTE: The headset automatically goes into pairing mode when it is used for the rst time.
Make sure the headset is powered on and the power adapter is not connected (you can’t use the
headset while it’s charging).
Press and hold MFB until the LED ashes alternating red and blue (approximately 6 seconds),
then release. The headset is in pairing mode and should be visible to other Bluetooth devices.
On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may
take several seconds, and it will be dierent for each phone; see your phone’s manual for
detailed instructions.)
►
1)
2)
3)