Filter
Top Products
5
Make sure the headset is powered o and the power adapter is not connected (you can’t use the
headset while it’s charging).
Press and hold
MFB
until the LED ashes alternating red and blue (approximately 6 seconds),
then release. The headset is in pairing mode and should be visible to other Bluetooth devices.
On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may
take several seconds, and it will be dierent for each phone; see your phone’s manual for
detailed instructions.)
Your phone should discover a device called a
BT229
or
BT229 headset
, When your phone asks if
you want to pair with this device, answer yes.
When your phone prompts you for a PIN code or password to pair with the BT229 enter
0000
.
When the headset is paired, the blue LED ashes twice every 5 seconds; your phone might also
display a conrmation message.
If the blue LED ashes once every 5 seconds, the headset is
not paired. Try the pairing procedure again.
1)
2)
3)
4)
5)
6)