Filter
Top Products
Wall Installation
Standard Wall Plate Mounting
These Phones are designed to be mounted on a standard AT&T or
GTE wall plate. To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand
into the notches at the top of
the Base Unit, rotate the Wall
Mount stand down and snap it
into place.
2. Plug the AC Adapter into the Base Unit as previously
described.
3. Place the AC Adapter cord
inside the molded channel of
the Wall Mount stand.
4. Plug one end of the short telephone cord into the
LINE
jack on
the Base Unit. Optionally, plug one end of a standard 2500
type desk phone into the
PHONE
jack. Then place the
telephone cord(s) inside the molded channel(s) on the bottom
of the Wall Mount stand.
5. Plug the other end of the short telephone cord into the modular
wall jack.
12
P:\ana9610e\9610usae.vp
Mon Aug 30 10:26:04 1999
Color profile: Disabled
Composite Default screen