Clearvue Illuminated Display
Your pager is equipped with the Clearvue illuminated
display. To activate this display, perform the following steps:
1. With your pager on, push and hold any key
(
<, >, ▲, ▼,orN) for two seconds.
2. The backlight illuminates and remains on for
approximately 20 seconds.
7
TIP
Pressing any key during this 20 second period
keeps the display illuminated. If no key is pressed
for 20 seconds, the illuminated display shuts off.
NOTE
Frequent use of the illuminated display will
shorten the battery life.