Filter
Top Products
Administrator Programming
Administrator Mode
98 Strata CIX DP5000-series Telephone UG 10/10
Station SD/ Name
1. Enter Administrator Mode.
2. Press
Next three times, display will show Station SD/Name
3. Press
Hold, display shows DN ID
4. Enter the DN number of the station whose speed dial you wish to label, display
will show DN XXXX IDX
5. Enter the two digit Speed Dial number you wish to program, display shows DN
XXXX IDX 01
6. Enter the name/label of this Station Speed Dial.
7. Press
Hold to save your changes.
8. To label additional Speed Dials for this extension, repeat steps 5~7.
9. To label Speed Dials for another extension, press
Rtrn, display will show DN ID
and repeat steps 4~7.
CO Line Name
1. Enter Administrator Mode
2. Press
Next four times, display will show CO Line Name.
3. Press
Hold, display will show CO Line.
4. Enter the CO line number whose name you wish to change (001~264), if you enter
001 display will show CO Line 001
5. Enter the name/label for the CO Line
6. Press
Hold to save your changes.
7. Repeat steps 4~6 to change addition CO Line names.
DNIS Name
1. Enter Administrator Mode.
2. Press
Next five times, display will show DNIS Name.
3. Press
Hold, display will show ILG (Incoming Line Group)
4. Enter the ILG number whose name you wish to change (001~128), if you enter 001
display will show ILG 001
5. Enter the name/label for the ILG.
6. Press
Hold to save your changes.
7. Repeat steps 4~6 to change addition ILG names.