Filter
Top Products
Add-on Module/DSS Console
Features
130 Strata DK Digital Telephone 10/01
Call Answering (CO Line)
If your DADM or DSS console is equipped with a /LQH button, you can answer CO
line calls from the DADM or DSS console as you would from a digital telephone. See
Chapter 2 – Features for detailed information.
➤ To answer an incoming CO Line call to a DADM or DSS Console
➤
Press the flashing /LQH.
Speed Dial
Your DADM or DSS console may be equipped with 6' (Speed Dial) buttons that can
be programmed to dial telephone numbers or to access features.
6' buttons on either
the DADM or DSS console function like
6' buttons on digital telephones. See
Chapter 2 – Features for information.
2. Hang up.
The call rings the called station once with the camp-on
tone. While the called station is receiving this tone, the
Line LED flashes green (on-hold rate) or if you are on
a [DN] button, it goes idle. The [DSS] LED remains
steady red.
When the called station answers the transferred call,
the Line LED becomes steady red. The [DSS] LED
remains steady red.
Note If the busy station is in the DND mode, the
call will not transfer, but will recall your
telephone immediately.
If the call is not answered after a specified Recall time
set in system programming, camp-on is cancelled and
the transferred call rings back.